CQB100-110S24 CQB100-110S12電源模塊

• 100W Isolated Output

• Efficiency to 93%

• 200KHz Switching Frequency

• 3:1 Input Range

• Regulated Outputs

• Remote On/Off
• Over Temperature Protection

• Over Voltage/Current Protection

• Continuous Short Circuit Protection

• Quarter Brick Size Meet Industrial Standard

• CE Mark Meets 2004/108/EC
• UL60950-1 Approval (Except 3.3 Vout)

• Meet EN50155

NOTE: 1. Nominal Input Voltage 110VDC

商：西安浩南電子科技有限公司  

            ：www.haonpower。。ｃｏｍ   ：[email protected]

1

V12

SPECIFICATIONS

All Specifications Typical At Nominal Line, Full Load, and 25℃ Unless Otherwise Noted

INPUT SPECIFICATIONS:

Input Surge Voltage (100ms max.) …………..……….…... 180Vdc max. Under Voltage Lockout ……….........….. power up …..….......………. 62V power down ……...….…. 56V

Positive Logic Remote ON/OFF:

Logic Compatibility ………………..………... Open Collector ref. to -Input Module ON…………… > 3.5Vdc to 75Vdc or Open Circuit Module OFF ………………………………………….. < 1.8Vdc

Input Filter ………………………………………………..….……... Pi Type

OUTPUT SPECIFICATIONS:

Voltage Accuracy ........................................………….......... ±1.5% max. Transient Response: 25% Step Load Change .………………..… <200µs External Trim Adj. Range …………………………………….……….. ±1 Ripple & Noise, 20MHz BW (note3)

3.3 & 5V...……..….. 40mV RMS, 100mV pk-pk max. 12V ……………..…. 60mV RMS, 150mV pk-pk max. 24V ……………..… 100mV RMS, 240mV pk-pk max.

Temperature Coefficient ................……..................…..... ±0.03%/°C Short Circuit Protection .........………………......................... Continuous Line Regulation (note1) …….............................................…. ±0.2% max.

Load Regulation (note2) …….......................…….................. ±0.2% max. Over Voltage Protection Trip Range ,% Vo nom. ................. 115-14 Current Limit .................……………….... 11-18 Nominal Output Start up time ……………………………………………….… 45ms typ.

CASE QB

All Dimensions In Inches(mm)

GENRAL SPECIFICATIONS:

Efficiency .................…..................................……..........…....... See Table

Isolation Voltage .............. Input/Output, Input/Case .......….. 2250VDC min.

Output/Case ………………….… 1500VDC min.

Isolation Resistance ..............................…......................…….... 10⁷ ohm min. Isolation Capacitance …………………...……………….…..…… 1000pF typ. Switching Frequency ........…………………............……….…... 200KHz typ. Operating Case Temperature ...………...........….....……........ -40℃ to 100℃ Storage Temperature …………………......……..……............ -55℃ to +105℃ Thermal Shutdown Case Temp. .………….…………………..……. 105℃ typ.

Humidity ....................................................... 95% RH max. Non condensing

MTBF ..... MIL-HDBK-217F, GB, 25℃, Full Load ..... XXS05 ... 240Khrs typ. XXS3V3 …….. 400Khrs typ., Others …….. 320Khrs typ.

Safety (Except 3.3 Vout) …….… UL60950-1 2^nd(Basic insulation), Approval EMC (note7) ….………… Meet EN50155(EN50121-3-2) with External Flter Shock/Vibration …………………....……………… Meet EN50155(EN61373) Environmental ………………………….……… Meet EN50155(EN60068-2-1) Dimensions ...................……. 2.28x1.45x0.50 inches (57.9x36.8x12.7 mm) Case Material .................................... Aluminum Baseplate with Plastic Case

Weight ……………………..……………………………………..………… 61.5 g

NOTE:

• Measured from high line to low line.

• Measured from full load to zero load.

• Output ripple and noise measured with 10uF tantalum and 1uF ceramic capacitor across output.

• Suffix "N" to the model number with negative logic remote on/off

Module on ……………………………………………..…. < 1.8VDC Module off ………………….. >3.5VDC to 75VDC or open circuit

• Suffix “-C” to the model number with clear mounting insert (3.2mm DIA.)

• An external input capacitor 120uF for all models are recommended to reduce input ripple voltage.

• Design meet EN50155 and RIA12 refer to application note.