SPU10-102，SPU10-105，SPU10-108，10W 桌面電源適配器

更新時(shí)間：2023-04-22

簡(jiǎn)要描述：

Wide Input Voltage 90 to 264 VAC, 47 to 63 Hz
2 Prong Plug-in Mains Connector
Output Voltage Available from 5Volts(DC) thru 36Volts(DC)
Single Output

發(fā)郵件給我們：[email protected]

西安浩南電子科技有限公司

：
: 2511137526
：[email protected]
地址：C座30619室
：710075
：www.haonpower.com

SPU10 10 Watt Switch Mode External Power Supplies

10 Watt Wallmount Switching Power Supplies

	Wide Input Voltage 90 to 264 VAC, 47 to 63 Hz
	2 Prong Plug-in Mains Connector
	Output Voltage Available from 5Volts（DC） thru 36Volts（DC）
	Single Output
	Class II
	LPS Energy Efficiency Level V
Model Number		Output Voltage	Output Amps
SPU10-102		5vdc	1.60 Amps
SPU10-103		6vdc	1.33 Amps
SPU10-104		9vdc	1.11 Amps
SPU10-105		12vdc	0.83 Amps
SPU10-106		15vdc	0.66 Amps
SPU10-107		18vdc	0.55 Amps
SPU10-108		24vdc	0.42 Amps
SPU10-109		30vdc	0.33 Amps
SPU10-110		36vdc	0.28 Amps

SPU10 series

Input Specifications

Input Voltage Range	90-264 VAC
Frequency Range	47-63 Hz
Inrush Current	@ FL （Cold Start） Low Line 30Amps maxAmps typ. High Line 60Amps max @ 230VAC
Input Current	@ FL Low Line 0.3Amps @ 115VAC High Line 0.2Amps @ 230VAC
Leakage Current	@ FL 0.25 mAmps max. @ 240VAC

General Specifications

Isolation	4242vdc
Efficiency	@ FL @230VAC 75% min. / 8 typ. / 85% max

Physical Specifications

Size （mm）	56.0 x 44.0 x 27.5 mm
Size （Inches）	2.2” x 1.73” x 1.08”
Weight （g）	90g
Weight （oz）	3.17oz

Output Specifications

Output Voltage	5vdc
Output Amps	1.60 Amps
Load Regulation	@ FL ± 5%, max. @ 230VAC
Temperature Coefficient	±0.04%/°C
Ripple and Noise	@ FL 1% Pk-Pk @ 90VAC max. 0.5% Pk-Pk @ 90VAC typ.
Transient Response	4mS @ 100VAC
Short Circuit Protection	Continuous
Start Up, Rise Time	1S typ.
Hold Up Time	10mS typ. @ 100VAC @ FL

Environmental Specifications

Operating Temperature	0 to +70°C （FL）
Working Humidity	5% to 95%, non-cond
EMI	CISPR-22 Class B @ 220VAC FCC PART-15 Class B @ 110VAC
MTBF	0.1 MHrs MIL-HDBK-217F（25°C）

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.